Asterisk for Raspberry Pi on ArchLinux: Difference between revisions

From KlavoWiki
Jump to navigationJump to search
No edit summary
Line 63: Line 63:
</pre>
</pre>


== vi to vim =
== vi to vim ==
<pre>
<pre>
pacman -R vi
pacman -R vi

Revision as of 02:16, 26 October 2012

If you don't want to follow these instuctions and would prefer to download an image you can do so by downloading the image from Asterisk for Rasberry Pi Image.

The following instructions are based on Arch Linux ARM (archlinux-hf-2012-09-18.zip)

Write Image to SD Card

Using Win32DiskImager and the latest version of Arch Linux ARM from Rasberry Pi write the image to the SD card.

Once the image is written insert the Sd card into the Rasberry Pi and boot. The device will get an IP address from DHCP.

Expand Parition

Now that the device has booted log on and change the default partiion from 2 GB to the maximum partiion of your SD card.

fdisk /dev/mmcblk0
d (delete)
2 (partition 2)
n (new)
p (primary partition)
2 (partition 2 as previously deleted)
enter (accept default start sector)
enter (accept default end sector)
w (write changes)

reboot

Once the rPi has rebooted

resize2fs /dev/mmcblk0p2
reboot


Swap File

As the rPi has limited RAM, either 256 or 512 depending on your version we'll creat a swap file to allow appliction to use higher memory if required.

I would recommend allocating the size of the swap file to be that equal to the RAM size.

fallocate -l 256M /swapfile
chmod 600 /swapfile
mkswap /swapfile
swapon /swapfile

The swap file is now active. We now need to ensure that it is used at boot.

vi /etc/fstab
<pre>
add the line to the file
<pre>
/swapfile none swap defaults 0 0

Update OS

pacman -Syu
reboot

Utilities

Install utilities to help with setup/administration

  # pacman -S initscripts vim mlocate zip unzip

vi to vim

pacman -R vi
ln -s /usr/bin/vim /usr/bin/vi

Create ll alias

vi /root/.profile
<pre>

add the line
<pre>
alias ll="ls -la"
= Enable Sound Card =
vi /etc/rc.conf
<pre>

add the line

<pre>
MODULES=(snd-bcm2835)

Regional settings

vi /etc/locale.gen (enable all AU and US, 4 lines)
vi /etc/rc.conf
locale-gen

Time Synchronisation

cp /usr/share/zoneinfo/Australia/Brisbane /etc/localtime
pacman -R openntpd
pacman -S ntp
ntpdate ntp.bri.connect.com.au

vi /etc/rc.conf
hwclock (remove)
ntpdate (add)

Edit hostname and network settings
  #  vi /etc/hostname
  #  vi /etc/hosts

  #  vi /etc/dhcpcd.conf
           add line: nohook resolv.conf
        remove line: nohook lookup-hostname


change IP address details
  # vi /etc/conf.d/network

	interface=eth0
	address=192.168.1.1
	netmask=255.255.255.0
	broadcast=192.168.0.255
	gateway=192.168.0.254

  # vi /etc/systemd/system/network.service

	[Unit]
	Description=Network Connectivity
	Wants=network.target
	Before=network.target

	[Service]
	Type=oneshot
	RemainAfterExit=yes
	EnvironmentFile=/etc/conf.d/network
	ExecStart=/sbin/ip link set dev ${interface} up
	ExecStart=/sbin/ip addr add ${address}/${netmask} broadcast ${broadcast} dev ${interface}
	ExecStart=/sbin/ip route add default via ${gateway}
	ExecStop=/sbin/ip addr flush dev ${interface}
	ExecStop=/sbin/ip link set dev ${interface} down

	[Install]
	WantedBy=multi-user.target


  # systemctl disable dhcpcd@eth0.service
  # systemctl enable network.service

  # reboot

  #  vi /etc/resolv.conf
	domain klaverstyn.com
	search klaverstyn.com
	nameserver 192.168.13.1


install required packages for asterisk
  # pacman -S gcc make hgsvn libxml2 libnewt sqlite subversion mysql spandsp speex
  # systemctl enable mysqld.service
  # systemctl start mysqld.service


secure mysql
  # /usr/bin/mysql_secure_installation

stop services to free memory
ensure correct time
  # systemctl stop ntpd.service
  # systemctl stop mysqld.service

install asterisk


Set asterisk service to start automatically
  # vi /etc/rc.conf
  add asteirsk to DEAMONS=


Install Sendmail
  # pacman -R heirloom-mailx
  # rm /etc/mail.rc.pacsave
  # pacman -S ssmtp
  # vi /etc/ssmtp/ssmtp.conf
          mailhub=192.168.13.3
          hostname=rpi.klaverstyn.com
          FromLineOverride=yes


install Apache, PHP and aCDR
  # pacman -S apache php-apache php php-gd 

  # vi /etc/httpd/conf/httpd.conf
         AllowOverride All
         DirectoryIndex index.php index.html index.htm index.html.var

  # systemctl enable httpd.service

  # vi /etc/php/php.ini
       uncomment
          extension=mysqli.so
          extension=mysql.so

  # vi /etc/httpd/conf/httpd.conf
          LoadModule php5_module modules/libphp5.so (add)
          Include conf/extra/php5_module.conf       (add)
          TypesConfig conf/mime.types               (uncomment)
          MIMEMagicFile conf/magic                  (uncomment)
          AddHandler application/x-httpd-php .php   (add)

  # vi /etc/httpd/conf/mime.types
          application/x-httpd-php5		php php5
  

  # systemctl start httpd.service

Note: The web root is /srv/http/


Backup Script
  # pacman -S smbclient



(perl requires ram, ensure swapfile)
google text to speech
  # pacman -S perl-yaml libyaml perl-libwww sox mpg123
  # perl -MCPAN -e "install Bundle::LWP"
  # perl -MCPAN -e "install CGI::Util"


fax2mail
  # yum -y install perl cpan libyaml perl-YAML

  # wget http://search.cpan.org/CPAN/authors/id/R/RO/ROSCH/mime-construct-1.11.tar.gz
  # tar xzvf mime-construct-1.11.tar.gz
  # cd mime-construct-1.11
  # perl Makefile.PL
  # make install 

  # cd
  # perl -MCPAN -e "install Bundle::LWP"
  # perl -MCPAN -e "install Proc::WaitStat"
  # perl -MCPAN -e "install MIME::Types"





reference:
https://wiki.archlinux.org/index.php/Systemd
https://wiki.archlinux.org/index.php/Configuring_Network
https://wiki.archlinux.org/index.php/Beginners%27_Guide
https://wiki.archlinux.org/index.php/LAMP#PHP