Asterisk Install: Difference between revisions

From KlavoWiki
Jump to navigationJump to search
 
(19 intermediate revisions by the same user not shown)
Line 8: Line 8:
Make sure all your prerequisites are installed.
Make sure all your prerequisites are installed.
<pre>
<pre>
yum -y install gcc gcc-c++ make wget subversion libxml2-devel ncurses-devel openssl-devel vim-enhanced kernel-devel mod_dav_svn sqlite-devel mysql-connector-odbc mysql-devel newt newt_devel newt-static
yum -y install make wget openssl-devel ncurses-devel subversion newt newt-static newt-devel libxml2-devel kernel-devel gcc gcc-c++ mysql sqlite-devel uuid-devel libuuid-devel speex-devel
</pre>
</pre>


= Installing Asterisk 11.x =
== For Asterisk 12 and 13 ==
<pre>
cd /usr/src/
wget http://www.digip.org/jansson/releases/jansson-2.9.tar.gz
tar xvf jansson-2.9.tar.gz
rm -f jansson-2.9.tar.gz
cd jansson-2.9
 
./configure
make
make install
make check
</pre>
 
 
'''Note''': The following command relies on rpmforge being installed for uriparser
<pre>
yum -y install libuuid libxslt uriparser
</pre>
 
= Installing Asterisk =


The First thing I did was to download the Asterisk source files.
The First thing I did was to download the Asterisk source files.
Line 30: Line 50:
</pre>
</pre>


== lipbri ==
== dahdi-linux ==
Install lipbri is you are connecting to a PRI service.
DAHDI (stands for Digium Asterisk Hardware Device Interface) is the replacement for Zaptel. As I have an [[X100P]] card installed into my system I need to install the Linux driver.  If you do not have any telecommunications cards installed you will still need to do the following so that ztdummy is installed.  This is the timing device so that MeetMe and or ConfBridge functions correctly.
<pre>
<pre>
tar xvzf libpri-1.4-current.tar.gz
tar xvzf dahdi-linux-complete-current.tar.gz
cd libpri-1.4.14
cd dahdi-linux-complete-2.7.0+2.7.0
make
make
make install
make install
make config
</pre>
</pre>


Once the above is done we need to edit '''/etc/dahdi/modules''' and make sure that only the required dahdi module(s) is/are loaded.  If you only want ztdummy install you need to remark out all the other drivers.


== dahdi-linux ==
== lipbri ==
DAHDI (stands for Digium Asterisk Hardware Device Interface) is the replacement for Zaptel. As I have an [[X100P]] card installed into my system I need to install the Linux driver.  If you do not have any telecommunications cards installed you will still need to do the following so that ztdummy is installed.  This is the timing device so that MeetMe and or ConfBridge functions correctly.
Install lipbri is you are connecting to a PRI service. With the later version of the libpri there is a dependency of dahdi to be installed.
<pre>
<pre>
tar xvzf dahdi-linux-complete-current.tar.gz
tar xvzf libpri-1.4-current.tar.gz
cd dahdi-linux-complete-2.6.2+2.6.2
cd libpri-1.4.14
make
make
make install
make install
make config
</pre>
</pre>
Once the above is done we need to edit '''/etc/dahdi/modules''' and make sure that only the required dahdi module(s) is/are loaded.  If you only want ztdummy install you need to remark out all the other drivers.


== asterisk ==
== asterisk ==
Line 65: Line 84:


cd /usr/src
cd /usr/src
wget http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.6pre21.tgz
wget http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.6.tar.gz
zcat spandsp-0.0.6pre21.tgz | tar xf -
tar xvf spandsp-0.0.6.tar.gz
cd spandsp-0.0.6
cd spandsp-0.0.6
./configure
./configure
Line 76: Line 95:
=== installation ===
=== installation ===
<pre>
<pre>
cd /usr/src/asterisk
cd /usr/src
tar xvzf asterisk-11-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz
cd asterisk-11.4.0
tar xvzf asterisk-13-current.tar.gz
cd asterisk-13.17.1
./contrib/scripts/get_mp3_source.sh
./contrib/scripts/get_mp3_source.sh
./configure
./configure --libdir=/usr/lib64
make menuselect
make menuselect
make
make
Line 86: Line 106:
make samples
make samples
make config
make config
ldconfig
</pre>
</pre>


Line 96: Line 117:


== asterisk-addons ==
== asterisk-addons ==
When you have finished the process on this page make sure you have a look at how to record your [[Cdr|CDR]] to MySQL.
When you have finished the process on this page make sure you have a look at how to record your [[Asterisk_CDR_Tables|CDR]] to MySQL.


[[Category : Asterisk]]
[[Category : Asterisk]]

Latest revision as of 01:04, 4 September 2017

Online book

Asterisk™: The Definitive Guide

Check List

Check the Asterisk Check List as a guide for all required product installation.

Prerequisite

Make sure all your prerequisites are installed.

yum -y install make wget openssl-devel ncurses-devel subversion newt newt-static newt-devel libxml2-devel kernel-devel gcc gcc-c++ mysql sqlite-devel uuid-devel libuuid-devel speex-devel

For Asterisk 12 and 13

cd /usr/src/
wget http://www.digip.org/jansson/releases/jansson-2.9.tar.gz
tar xvf jansson-2.9.tar.gz
rm -f jansson-2.9.tar.gz
cd jansson-2.9

./configure
make
make install
make check


Note: The following command relies on rpmforge being installed for uriparser

yum -y install libuuid libxslt uriparser

Installing Asterisk

The First thing I did was to download the Asterisk source files.

Asterisk 11.x.0

I did not download and install the Libpri or DAHDi packages as I don't have any primary rate cards installed on my system and as I no longer use MeetMe witch is reliant on a timing device with DAHDi I now use ConfBridge so there are less Linux dependencies to install.

NOTE: If you would like to download, install and use the latest and greatest version of Asterisk (the cutting edge) download the files listed on the Asterisk SVN Install page. If you do download the SVN files don't download the files listed below.

mkdir /usr/src/asterisk
cd /usr/src/asterisk
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz

dahdi-linux

DAHDI (stands for Digium Asterisk Hardware Device Interface) is the replacement for Zaptel. As I have an X100P card installed into my system I need to install the Linux driver. If you do not have any telecommunications cards installed you will still need to do the following so that ztdummy is installed. This is the timing device so that MeetMe and or ConfBridge functions correctly.

tar xvzf dahdi-linux-complete-current.tar.gz
cd dahdi-linux-complete-2.7.0+2.7.0
make
make install
make config

Once the above is done we need to edit /etc/dahdi/modules and make sure that only the required dahdi module(s) is/are loaded. If you only want ztdummy install you need to remark out all the other drivers.

lipbri

Install lipbri is you are connecting to a PRI service. With the later version of the libpri there is a dependency of dahdi to be installed.

tar xvzf libpri-1.4-current.tar.gz
cd libpri-1.4.14
make
make install

asterisk

faxing prerequisites

If you would like to be able to use faxing capabilities with Asteirsk you need to install a few packages so that Asterisk can build the faxing components.

Execute the following line to add /usr/local/lib/ to /etc/ld.so.conf.

echo /usr/local/lib/ >> /etc/ld.so.conf
yum -y install libtiff-devel

cd /usr/src
wget http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.6.tar.gz
tar xvf spandsp-0.0.6.tar.gz
cd spandsp-0.0.6
./configure
make
make install
ldconfig

installation

cd /usr/src
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz
tar xvzf asterisk-13-current.tar.gz
cd asterisk-13.17.1
./contrib/scripts/get_mp3_source.sh
./configure --libdir=/usr/lib64
make menuselect
make
make install
make samples
make config
ldconfig

verbose

vi /etc/asterisk/asterisk.conf

Modify verbose= to suite your default verbosity level.

asterisk-addons

When you have finished the process on this page make sure you have a look at how to record your CDR to MySQL.